Fiberglass Composite Mat EC240 of Nanjing Tianming:
Basic Parameters:
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then the one most suitable for you will be recommended.
Packaging:
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
Any question, please contact me:
Composite Mat Fiberglass Mat with PP
Composite Mat Fiberglass Mat with PP
Composite Mat Fiberglass Mat with PP
Basic Parameters:
Model No.: | EC240 |
Weight: | 0.79oz. per sq/ft or 240grams per sq/m |
Width: | up to 102.36" or up to 2600mm |
Net Weight per roll: | 66lbs±1.1lbs or 30kg±0.5kg |
Size of the Inner Carton Tube: | Length 51" * Diameter 3" * Thickness 0.2" or Length 1300mm * Diameter 76mm * Thickness 5mm |
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then the one most suitable for you will be recommended.
Packaging:
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
Model No. | Weight | Width | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | |||
(oz. per sq/ft) | (grams per sq/m) | (inch) | (mm) | (%) | (%) | (lb) | (kg) | ||
EMSC-P | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-8 | ≤0.2 | 66 | 30 | Pultrusion / Winding |
EMSC-R | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-6 | ≤0.2 | 66 | 30 | Injection |
EMSC-M | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-8 | ≤0.2 | 66 | 30 | Molding & Hand Lay-up |
EMSP | 0.79 | 240 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
EMSP | 1.10 | 335 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
EMSP | 1.60 | 485 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
Any question, please contact me:
Composite Mat Fiberglass Mat with PP
Composite Mat Fiberglass Mat with PP
Composite Mat Fiberglass Mat with PP