E-Glass Fiberglass Woven Roving Combimat

 Woven roving combo mat is made of woven roving and chopped fiberglass strand complex of, then stitched together with polyester yarn.t is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, Auto parts, refrigerated tools and structural sections industry etc, suitable for hand lay up, RTM, pult

Featured Products

 E-Glass Fiberglass Woven Roving CombimatWoven roving combo mat is made of woven roving and chopped fiberglass strand complex of, then stitched together with polyester yarn.
t is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, Auto parts, refrigerated tools and structural sections industry etc, suitable for hand lay up, RTM, pultrusion, vacuum processes.

 
General Data

Code

Weight  (g/m2)

Woven roving
(g/m2)

Chopped strand
(g/m2)
%
Moisture  Content

Wet speed
(≤S)

Layer
EMK200/200400200200≤0.2602
EMK300/300600300300≤0.2602
EMK400/300700400300≤0.2602
EMK500/300800500300≤0.2602
EMK500/450950500450≤0.2602
EMK600/300900600300≤0.2602
EMK600/4501050600450≤0.2602
EMK800/3001100800300≤0.2602
EMK800/4501250800450≤0.2602
 
Remarks:
Roll width: Standard width in 1250mm, 1270mm, and other sizes depends on customer's real needs, available in 200mm to 2600mm.
Packing: Fiberglass woven roving combo mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15ºC to 35ºC and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
E-Glass Fiberglass Woven Roving Combimat
E-Glass Fiberglass Woven Roving Combimat
E-Glass Fiberglass Woven Roving Combimat


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours